Phoenix trims BIOS startup time down to about a second

bios Gather ‘round, don’t be shy. Let’s all take a look at Windows 7 booting up in about ten seconds. How is this possible? Well, turn Aero off, strip out all the bloatware, and make sure you’re using an ultra fast solid state drive. That, and trim the BIOS start time down to a little over one second.

As you can see in the video embedded on LAPTOP’s post (skip ahead to about the one minute mark) the whole BIOS song and dance doesn’t even appear. The power button is pressed, and a second or two later we see the Windows 7 startup screen.

Then, we’re greeted with the desktop – all in less time than it takes to pour a non-foamy beer. This is all possible thanks to Phoenix’s new “Instant Boot Bios,” which is currently being offered to OEMs for use in future notebooks (it might be available as an upgrade, too).

According to LAPTOP:

“Enter Phoenix’s new Instant Boot BIOS. It cuts down the post time to roughly one second. Phoenix’s Chief Scientist Steve Jones explained that the new BIOS uses UEFI technology (a new kind of BIOS platform) to power on several system devices simultaneously and to run only those processes which are absolutely necessary to hand control over to the OS.

We had a chance to view Instant Boot in action on a Lenovo T400s, which was equipped with a high-speed SSD. About one second after hitting the power button, we saw the hard drive light flickering and noticed that Windows had already started loading. Because this system had a high-speed SSD and the Windows install didn’t have a lot of extra drivers or crapware, Windows 7 itself took only 10 seconds to get us to a desktop.”

The total time for the BIOS to do its thing was 1.37 seconds – that oughta shave precious moments off of just about any computer whether it’s got a highfalutin solid state drive or not.

Phoenix’s 1-Second Instant Boot Bios Really Works [LAPTOP]